Suppliers with verified business licenses
Audited Supplier OVERVIEW--THERMAL EVAPORATION
Thermal evaporation is a popular physical vapor deposition technique because of its simplicity. During this process, a material in a high-vacuum environment is heated to its evaporation point by joule heating of the resistive boat in which it is located. The vaporized molecules then travel from the source to the substrate where they nucleate together, forming a thin film coating. A wide variety of materials can be deposited using this technique such as aluminum, silver, nickel, chrome, magnesium, among many others.
Stainless steel high-vacuum chamber dual-source thermal evaporation coater for laboratory
1. This equipment is a small desktop evaporation coater ,which is installed with tungsten basket evaporation source ,it canSpecifications of thermal evaporation coater
| Product Name | Desk dual evaporation source thermal evaporation coater for metal coating |
| Product Model | TN-EVP170S-2S-A |
| Installation Condition | 1. Working environment temperature: 25ºC±15ºC,humidity: 55%Rh±10%Rh; 2. Equipment power supply:AC220V,50Hz, must be well grounded; 3. Rated power:2500w; 4. Equipment for gas :The equipment chamber should be filled with argon gas for cleaning. The customer should prepare argon gas with purity ≥99.99%. 5. Table size requirements: 600*600*700mm,bearing capacity ≥ 70kg; 6. The position should be well ventilated and cooled. |
| Technical Indicators | 1. Number of evaporation sources: 2, each evaporation source is equipped with baffle; 2. Evaporation source voltage: 10V 3. The evaporation current is continuously adjustable from 0 to 100A 4. With two tungsten boat, two tungsten basket; 5. Stainless steel rotating upper sample table, diameter of 60mm; 6. The distance between the sample platform and the evaporation source is adjustable from 60 to 100mm; 7. The vacuum cavity is a stainless steel cavity with an outside diameter of 170mm, and inside diameter 160mm and a height of 210mm; 8. The air pumping interface of the vacuum chamber is KF40; 9. Air intake interface is 1/4 inch double ferrule joint ,stainless steel fine-tuning valve is provided by default to adjust the air intake; 10. Touch screen is 7inch color touch screen; 11. Adjustable sputtering current ,sputtering safety current value and safety vacuum value can be set; 12. safety protection: over current, vacuum is too low automatically cut off the sputtering current; 13. Ultimate vacuum:1Pa(matching double stage rotary vane pump); 14. Vacuum measurement is Parana vacuum gauge ,the range is:1~105Pa |
| Notice | In order to give full play to the vacuum performance of the cavity, it is recommended to use it with molecular pump group |
| Optional accessory | |
| Film thickness Monitor |
1. Film thickness resolution:0.0136Å(aluminum) 2. Accuracy of film thickness :±0.5%,it depends on process conditions, especially sensor position, material stress, temperature and density 3. Measuring speed:100ms to 1s per times ,measurement range can be set :500000Å(aluminum) 4. Standard sensor crystal:6MHz 5. Suitable for wafer frequency:6MHz 6. suitable for wafer size:Φ14mm 7. mounting flange:CF35 |
| Another Accessory | 1. tungsten boat, tungsten basket; 2. Organic evaporation source (including quartz boat and tungsten wire heating source) 3. CY-CZK103 series high performance molecular pump set(including composite vacuum gauge, measuring range 10-5Pa~105Pa); 4. CY-GZK60 series small molecular pump set(including composite vacuum gauge, measuring range 10- 5Pa~102Pa) 5. VRD-4 bipolar rotary vane vacuum pump 6. KF40 Vacuum bellows; The length can be 0.5m, 1m or 1.5m. KF40 clamp bracket; 7. Film thickness meter crystal oscillator; |
Q. Are you manufacturer or trading company?
A. We are professional manufacturer of laboratory instruments, We have professional R&D team and workshop, which can promise the qulaity and after-sale service.
Q. How's your warranty?
A. Our warranty is 12 months, and provide lifetime maintenance. We provide 24 hours on-line service.
Q. How long is your delivery time? If I want to customize the instrument, how long does it take?
A. 5-10 days----in store. Customzied products---It usually takes 30-60 days depending on your requirements.
\
Q. Power supply and plug?
A. We can provide products accroding to your local voltage and plug standard.
Q. How to pay?
A. T T, L / C, D / P, etc.
Q. How is the package of goods? Delivery methods?
A. Standard export fumigation sign wooden box packaging or as your requirements.
WE WANT TO HEAR ABOUT YOUR PROCESS!
Please get in touch and we can collaborate on your project. When we work together, amazing things can happen. Your brilliant ideas with our innovative team will create the tool that will bring your research or production to the next level. We're looking forward to hearing from you.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}