Compact Tape Casting Coater With vacuum chuck and film applicator
Product Description
This film coater is a compact tape casting coater with a heating cover designed to produce films with consistent thickness. It has a unique driving system to produce a smooth coating on all types of materials. The flat vacuum chuck is built in to hold the substrate sheet in place, One 100 mm width adjustable micrometer applicator (doctor-blade). Heating plate with digital controller either on top or bottom is optional for drying up to 100°C with +/-1°C temperature accuracy. This equipment can be used for researchers on ceramic tape castings and Li-Ion battery electrode coating.
Product Parameters
Compact Tape Casting Coater specifications:
| Model |
CY-MSK-AFA-I |
CY-MSK-AFA-III-HB |
CY-MSK-AFA-III-110 |
CY-MSK-AFA-III-220 |
Optional Heating
Cover Voltage and Power |
Without Heating cover |
Heating Bed:
( bottom heated)
220VAC 850W 100ºC |
Top Heating cover:
110VAC 1.2KW, 100ºC |
Top Heating cover:
220VAC 1.2KW, 100ºC |
| Working Power of Coater |
Power adaptor: Input 100-240VAC, Output 24VDC |
| Traverse Speed |
- 10 - 100 mm/sec variable
- Accuracy: +/-10 mm/sec
|
| Stroke Length |
10 - 250 mm adjustable by using Adjustable Position Switch |
Vacuum Chuck |
- Vacuum chuck made of Aluminum alloy with < 1.0 mm hole
- Vacuum Chuck Dimensions: 365mm(L) x 200mm(W)
|
Pump connector
|
- Vacuum control power switch is located on the front panel, and power plug ( female ) built in the back of the machine to connect an optional vacuum pump.
- The pump connector is compression type 8mm O.D tube fitting which is located on the back panel (see pic below). An 8mm Dia. x 4ft polyurethane tube is included.
|
Accessories: Film Applicator
|
- One 100 mm width micrometer adjustable film applicator is included (thickness adjustable from 0.01 - 3.5 mm)
- For coating film less than 10 microns, please order fixed thickness coating bar ( click Pic left-1 below )
- Travel Pusher and waste plate are included for pushing the Film Applicator (see pic below-middle ).
Note: Thinnest film can be achieved is > 10 microns |
| Heating Cover(Optional) |
- Pre-installed on the top cover
- Built-in digital temperature controller with accuracy of +/-1°C
- Suspension support helps open cover easily and safely
- Max. Heating Temperature: 100°C
- Note: In order faster and uniform heating, please preheated vacuum chunk to 60- 70ºC before coating, and keep heating during coating, then close cover and increase temperature to ~100ºC after coating.
|
| Warranty |
One Year limited warranty with lifetime support |
Compact Tape Casting Coater product details:
Company Profile
OUR AIM is to make your intelligent idea come true. COME TO US PLEASE !
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}