| Type: | Coating Production Line |
|---|---|
| Coating: | Vacuum Coating |
| Substrate: | Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
8-inch stainles spin coater with heatable sample stage
This product is a spin coater, also known as the spin processor, which uses centrifugal force generated by high-speed rotation to coat film materials. This model adopts a special design, so that the substrate can be heated simultaneously during the spin coating process. The maximum heating temperature is 200ºC, which can meet the temperature requirements of some solutions in the spin coating process. At the same time, the equipment is also equipped with a liquid drain pipe and a waste tank to facilitate customers to collect waste liquid and effectively prevent corrosive liquid from splashing into the environment.
|
Power supply |
AC220V, 50Hz |
|
Chamber material |
stainless |
|
Upper cover |
PVC (Polyvinyl chloride, for observing the coating state conveniently) |
|
Sample stage |
Gold-plated copper plate, with good thermal conductivity |
|
Substrate size |
Diameter ≤ 8 inches (200mm) |
|
Heating mode |
Ceramic heating ring |
|
Operating temperature |
RT-200ºC |
|
Rotation speed |
0-3000rpm |
|
Speed resolution |
1rpm |
|
Operation Mode |
7 inch HD LCD touch screen |
|
Glue dropping mode |
Manual glue dispensing, liquid can be supplied during spin coating |
|
Liquid drain pipe and waste liquid tank |
PTFE |
|
Spin coating curve |
Each curve has 5 segments, a total of 5 curves can be stored |
|
Vacuum chuck |
Gold-plated, 3 pieces with diameters of 10mm, 25mm, 55mm |
|
vacuum pump |
Oil-less pump |
|
Pumping speed |
50 L/min |
){kind=link}