New Production Penetrating Ultrasonic Spraying Nozzles

• Application: Hardware Spraying Equipment, Wood Spraying Equipment, Plastic Spraying Equipment, Porcelain Spraying Equipment
• Type: Air Spray Equipment
• Coating: Powder
• Model NO.: ultrasonic nozzles
• Certification: CE
• Method Type: Automatic
• Condition: New
• After-sales Service: 12 Months
• Warranty: 12 Months
• Transport Package: Fumigated Wooden Box
• Specification: 210*250*180mm
• Trademark: TN
• Origin: Henan China
• HS Code: 8486209000
• Production Capacity: 200/Month

Product Description

Penetrating ultrasonic spraying nozzles

Product Description

Penetrating ultrasonic nozzles are available in a variety of tip configurations and lengths, depending on the diameter and length of the tube. A common application is spray silica coating to speed clotting, where a silica slurry is sprayed onto the tube wall to form a uniform film of silica particles.

At the same time, the ultrasonic vibration of the nozzle can break down any silica agglomerates and ensure a uniform coating on the tube wall. Ultrasonic nozzles also have the ability to apply an atomized spray to the wall of the coating area at the bottom of a BCT or syringe barrel, rather than coating the entire tube, allowing for more precise control of coating location.



 

Product Parameters

Spraying in narrow spaces

The probe-type ultrasonic nozzle is an elongated ultrasonic atomizing nozzle. It adopts ultrasonic atomizing nozzle technology. The extended nozzle front-end design allows the ultrasonic nozzle to penetrate into a narrow space for spraying. It is mainly used for detecting and spraying. The application of spraying into the inner wall of the pipe.

This nozzle is designed for easy integration into high-volume OEM production lines, and its unique slim design allows it to be used in parallel with multiple test tube racks. The integration of penetrating ultrasonic nozzles with smart ultrasonic generator technology provides superior coating uniformity and repeatability. The ability to precisely fine-tune the drive power produces a tighter droplet distribution, smaller droplets, and rapid drying of the dispersion.

Ultrasonic atomization spray systems are one option for producing internal coatings on medical devices such as blood collection tubes (BCTs) and syringe barrels. The ultrasonic blood collection tube spraying system can evenly apply clot activators and anticoagulants, including heparin, EDTA, silicon dioxide, acid citrate glucose and other materials inside the blood collection tube. Ultrasonic nozzles are also capable of spraying drugs onto the desired area of a blood collection tube or syringe barrel, rather than coating the entire tube.

Nozzle design and details
The nozzles are made from very high-strength titanium alloys and other proprietary metals, giving them excellent chemical resistance and providing superior acoustic properties. In addition, the nozzles are available in different tip configurations and different lengths, depending on the diameter and length of the tube.

The ultrasonic spraying system can combine multiple penetration nozzles at the same time to perform spraying operations on blood collection tubes. This can improve spraying efficiency and save spraying time. Since ultrasonic nozzles generally spray at low speeds, they can avoid the possibility of overspray or material splashing during spraying, which can effectively save the cost of spraying materials.

The ultrasonic atomizing head uses an SMA connector for power supply, because the advantages of the SMA connector are high frequency of use, small size, and stable connection. The advantage of using high quality valve connector is that the connection is convenient, fast, reliable and does not require tools. The liquid supply end is connected to the infusion tube using a straight-through ferrule to enhance the connection strength and reduce the impedance of the atomizing head.


The performance parameters of the ultrasonic transducer include resonant frequency, frequency bandwidth, electromechanical coupling coefficient, electroacoustic efficiency, mechanical quality factor impedance characteristics, frequency characteristics, etc., which will affect its performance. Hertz transducers and atomization heads are manufactured before leaving the factory Corresponding testing has been carried out to ensure that it has lower acoustic impedance, higher quality factor and electromechanical coupling coefficient, thereby ensuring that each atomizer head can operate stably and efficiently for a long time.
 

Company Profile

 

 

 

 

Q. Are you a manufacturer or a trading company?

A. We are professional laboratory instrument manufacturers, having our own design team and factory with mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?

A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?

A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?

A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?

A.T / T, L / C, D / P, etc., it is recommended to use Made in China Trade Guarantee.

Q. How is the package of goods? Delivery methods?

A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

More questions, please contact us.